Sydney Waterproofing

Waterproofing that stops leaks before they start

A to Z Tiling and Waterproofing installs fully compliant waterproofing membranes for bathrooms, laundries, and wet areas across Sydney, protecting your property from water damage that is expensive to reverse and hard to spot until it becomes serious.

AS 3740Compliant Membranes
20+ YearsExperience
6 YearWorkmanship Guarantee
The Problem

Why waterproofing is not the place to cut corners

Almost every leak we get called out to could have been avoided. These are the problems Sydney homeowners live with when waterproofing is rushed, skipped, or done by someone who was never coming back.

The membrane was never finished properly

Thin coats, missed corners and nothing sealed around the floor waste. It all looks fine once the tiles are on, then it fails within a couple of wet seasons.

How we fix itPrimed substrate, full coats to specification, and every corner, hob and penetration detailed.
Failed patchy waterproofing membrane around a floor waste

A stain appears on the ceiling downstairs

By the time you see the mark, water has been tracking through framing and plasterboard for months, and the repair is no longer just a bathroom.

How we fix itCompliant membranes with correct upturns, then water tested before a tile goes down.
Water stain on a ceiling below a bathroom

The bathroom smells damp and never dries out

Musty air, black spotting in the silicone and grout that stays dark all mean moisture is sitting somewhere it should never have reached.

How we fix itCorrect falls, sealed junctions, and grout and sealants matched to the wet area.
Mouldy grout and silicone in a shower

Water pools instead of running to the drain

No fall to the waste leaves standing water, slippery floors and constant pressure on the weakest point of the waterproofing.

How we fix itScreed and falls set to the drain, then checked with water before tiling.
Water pooling on a tiled shower floor

Nobody will take responsibility for the leak

The waterproofer blames the tiler, the tiler blames the builder, and you are the one chasing phone calls while the damage spreads.

How we fix itOne team waterproofs and tiles, with photos of every stage, so accountability sits with us.
Two tradesmen in an unfinished bathroom

Fixing it means demolishing a new bathroom

Failed waterproofing cannot be patched from the surface. Tiles come off, the room is out of action, and you pay for the same job twice.

How we fix itDone correctly the first time and backed by a written 6 year workmanship guarantee.
Bathroom tiles being demolished to redo waterproofing
Waterproofing Services

Waterproofing services we provide

Bathroom wet area waterproofing in Sydney

Bathroom & Wet Area Waterproofing

Full membrane systems for showers, bathroom floors and walls, installed to AS 3740 before any tiling begins.

Laundry floor waterproofing around a floor waste

Laundry Waterproofing

Waterproofing for laundries and internal wet areas exposed to overflow, spillage and appliance leaks.

Shower recess membrane and hob detailing

Shower Recess Waterproofing

Corner and hob detailing, angle fillets and membrane upturns, exactly where leaks most commonly start.

Bathroom renovation waterproofing in progress

Renovations & New Builds

Waterproofing scoped and installed as part of a renovation or new build, sequenced around your builder and trades.

Leak detection on a bathroom wall

Leak Detection & Repairs

Diagnosis of failed membranes and full remediation, including tile removal where needed, so the area is waterproofed properly again.

Waterproofing compliance documentation on site

Compliance Documentation

Work carried out and documented to AS 3740, supporting certificate of compliance requirements where applicable.

Why A to Z

Why Sydney homeowners trust us with waterproofing

Compliant with AS 3740 on every job

Every wet area is installed to the current Australian Standard for waterproofing of domestic wet areas, not to whatever is quickest on the day.

Waterproofing and tiling from one team

No handover between trades. The crew that waterproofs also tiles, so sequencing, falls and detailing are never compromised.

Photographed before the tiles cover it

Membrane application is documented at every stage, so you have proof of what sits under your tiles if you ever need it.

Cured properly, not rushed to hit a deadline

We let the membrane cure fully before tiling. It is the most common corner cut in the trade, and the one that causes the most damage.

How It Works

From inspection to sign off

01

Inspection and Quote

We assess the wet area and confirm scope, membrane system, and a fixed quote.

02

Surface Preparation

The substrate is cleaned, primed, and prepared to manufacturer and AS 3740 specifications.

03

Membrane Application

Membrane is applied to floors, walls, hobs, and penetrations, with the correct fall to the drain.

04

Curing, Inspection, Sign Off

The membrane cures fully before tiling proceeds, and documentation is provided.

Sydney harbour and city skyline at golden hour
ServicingGreater Sydney
Service Area

Waterproofing across greater Sydney

We waterproof homes, apartments and commercial wet areas right across the Sydney metropolitan area, from the Inner West and Eastern Suburbs to Western Sydney, the North Shore and the Hills.

01

Sydney CBD & Inner West

Apartment and terrace wet areas

02

Western Suburbs

New builds and full bathroom rebuilds

03

Eastern Suburbs

Coastal homes, showers and balconies

04

Northern Sydney

Renovation and remedial waterproofing

05

Southern Sydney

Laundries, bathrooms and internal wet areas

06

The Hills District

Family homes and second bathrooms

Not sure if we cover your suburb? Call 0481340386 and we will let you know.
Our projects

Recent waterproofing projects

Membranes, wet-area preparation and tiled finishes from our own Sydney sites.

Video
Sheet membrane bedded into a shower base
Video
Primer and membrane rolled over a bathroom floor
Video
Membrane detailed into corners and junctions
Two-coat shower membrane, taped and sealedMembrane
Two-coat shower membrane, taped and sealed
Video
Rendered pool shell prepared for waterproofing
Waterproofed shower base tiled and drainedWet area
Waterproofed shower base tiled and drained
Full bathroom wet area over new membraneBathroom
Full bathroom wet area over new membrane
Sealed niche and mosaic shower finishShower
Sealed niche and mosaic shower finish
Niche framed and sealed before tilingShower
Niche framed and sealed before tiling
Powder room floor and wall waterproofingWet area
Powder room floor and wall waterproofing
Mosaic shower wall over waterproofed substrateShower
Mosaic shower wall over waterproofed substrate
FAQ

Common questions

What is AS 3740 and why does it matter?

AS 3740 is the Australian Standard covering waterproofing of domestic wet areas. It sets minimum requirements for membrane coverage, falls, and detailing. Waterproofing that doesn't meet this standard can void insurance claims and cause costly failures.

How do I know if my bathroom needs to be waterproofed again?

Warning signs include stains on ceilings below the bathroom, a musty smell, soft or discoloured flooring near the shower, or visible movement in grout and sealant.

How long does waterproofing take to cure before tiling?

Curing times depend on the membrane system and site conditions, typically 24 to 48 hours before tiling can begin. We factor this into your project timeline from the outset.

Do I need a waterproofing certificate for my renovation?

Depending on your council and the scope of work, a certificate of compliance for waterproofing may be required, particularly for bathroom renovations and new builds. We can advise what applies to your project.

What happens if waterproofing fails after installation?

All waterproofing work is covered by our 6 year workmanship warranty. If an issue relates to our installation within the warranty period, we assess and remediate it.

Get Started

Protect your property before it costs you

Book a free waterproofing assessment with Sydney's tiling and waterproofing specialists.